The advantages and maintenance methods of active wire drawing machines from polishing machine manufacturers.
1. Good uniformity: After polishing and drawing, the silk path will not show uneven depth, mainly manifested as uniform and consistent silk path, convenient silk, high workpiece efficiency, and better effect with longer service life of imported 3M masterbatch.
2. Good heat dissipation: The material adopts a three-dimensional structure, with a large amount of elasticity in the open space, so that the surface of the workpiece will not turn black, discolor or leave residual substances due to overheating during grinding.
3. Widely applicable, used for polishing, drawing, and surface treatment of various workpieces.
Such as stainless steel, aluminum alloy, copper iron parts, and various metal materials
The maintenance of the wire drawing machine is as follows:
1. It is necessary for the water mill active wire drawing machine to be operated by a dedicated person, and the operator must undergo professional safety operation procedures and training in operating skills.
2. Operators should conduct corresponding inspections of the equipment before starting work. For details, please refer to the preparation before starting work.
3. Regularly clean the water tank of the active wire drawing machine for the water mill and add smooth oil to the smooth parts.
4. If any noise, vibration or other abnormal phenomena are found during the homework, immediately stop the machine for inspection, and if necessary, inform professional maintenance personnel to inspect and repair or inform the manufacturer to send personnel for repair.
5. It is necessary to turn off the power and tidy up the equipment and surroundings before leaving work every time.
6. Due to holidays or other reasons, the water mill active wire drawing machine is temporarily suspended from use. The equipment should be thoroughly cleaned, lubricated with smooth oil, and briefly sealed. It is prohibited for the water mill active wire drawing machine to come into direct contact with water or other corrosive substances to avoid unnecessary damage.
