The characteristic of a flat wire drawing machine is that it is controllable, and its operating system is operated and processed by a control cabinet and control panel, achieving fully automatic wire drawing operations. During use, to prevent accidents from occurring, its main body welding is very sturdy and can be used in a centered manner.
Different types of wire drawing machines have different processing products, with varying processing widths and adjustable heights. If any accidents occur during the operation of the wire drawing machine, the main motor of the flat wire drawing machine can perform emergency braking, pause the operation, and inspect the machine from scratch to see if there are any safety hazards.
Flat drawing machines are primarily used in industries such as mechanical manufacturing, hardware processing, petrochemicals, plastics, bamboo and wood products, wires and cables. When installing, the foundation of the device should be very stable to prevent oscillation; The device needs to be debugged to ensure that the stretching axis of the wire is symmetrical with the center line of the mold hole, so that the stress on the wire and the pulling mold is uniform.
During the pulling process, it is necessary to prevent frequent parking, as the friction caused by the tensile stress during pulling and starting is much greater than that during normal pulling, which will inevitably increase the wear of the mold. Other wires used for drawing need to undergo pre-treatment. The so-called pretreatment includes surface pretreatment and heat treatment. For wires with dirty surface and high adhesion of impurities, they need to be cleaned, dried, and then pulled; For wires with a lot of oxide skin on the surface, they should be first acidified and dried before being pulled; For wires with peeling, dents, and heavy skin on the surface, they need to be polished by a polishing machine before being pulled out; For wires with excessive or uneven hardness, annealing or tempering should be carried out first to reduce the hardness and maintain outstanding hardness uniformity before drawing.
